REFERENCES
1. Burkitt, D.; Patidar, R.; Greenwood, P.; et al. Roll-to-roll slot-die coated P–I–N perovskite solar cells using acetonitrile based single step perovskite solvent system. Sustain. Energy. Fuels. 2020, 4, 3340-51.
2. Parvazian, E.; Watson, T. The roll-to-roll revolution to tackle the industrial leap for perovskite solar cells. Nat. Commun. 2024, 15, 3983.
3. Kim, Y. Y.; Yang, T. Y.; Suhonen, R.; et al. Roll-to-roll gravure-printed flexible perovskite solar cells using eco-friendly antisolvent bathing with wide processing window. Nat. Commun. 2020, 11, 5146.
4. Weerasinghe, H. C.; Macadam, N.; Kim, J. E.; et al. The first demonstration of entirely roll-to-roll fabricated perovskite solar cell modules under ambient room conditions. Nat. Commun. 2024, 15, 1656.
5. Yang, X.; Zhu, Y.; Yan, S.; Hu, H.; Chen, C.; Tang, J. Blade-coating perovskites for tandem devices: liquid mechanism, film formation, and performance. Solar. RRL. 2025, 9, 2500149.
6. Yang, F.; Huang, Y.; Li, Y.; Li, Y. Large-area flexible organic solar cells. npj. Flex. Electron. 2021, 5, 30.
7. Yan, Y.; Li, J.; Liu, Q.; Zhou, P. Evaporation effect on thickness distribution for spin-coated films on rectangular and circular substrates. Coatings 2021, 11, 1322.
8. Sangale, S. S.; Kwon, S.; Patil, P.; Lee, H.; Na, S. Locally supersaturated inks for a slot-die process to enable highly efficient and robust perovskite solar cells. Adv. Energy. Mater. 2023, 13, 2300537.
9. Zhang, B.; Chen, W.; Chen, H.; et al. Rapid solidification for green-solvent-processed large-area organic solar modules with > 16% efficiency. Energy. Environ. Sci. 2024, 17, 2935-44.
10. Wang, K.; Wu, C.; Hou, Y.; et al. Isothermally crystallized perovskites at room-temperature. Energy. Environ. Sci. 2020, 13, 3412-22.
11. Cheng, Y.; Peng, Y.; Jen, A. Y.; Yip, H. L. Development and challenges of metal halide perovskite solar modules. Solar. RRL. 2021, 6, 2100545.
12. Jiang, Q.; Tong, J.; Xian, Y.; et al. Surface reaction for efficient and stable inverted perovskite solar cells. Nature 2022, 611, 278-83.
13. Hu, L.; Zhao, Q.; Huang, S.; et al. Flexible and efficient perovskite quantum dot solar cells via hybrid interfacial architecture. Nat. Commun. 2021, 12, 466.
14. Yang, Z.; Chueh, C.; Zuo, F.; Kim, J. H.; Liang, P.; Jen, A. K. High-performance fully printable perovskite solar cells via blade-coating technique under the ambient condition. Adv. Energy. Mater. 2015, 5, 1500328.
15. Dai, X.; Deng, Y.; Van Brackle, C. H.; et al. Scalable fabrication of efficient perovskite solar modules on flexible glass substrates. Adv. Energy. Mater. 2019, 10, 1903108.
16. Chen, H.; Ye, F.; Tang, W.; et al. A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules. Nature 2017, 550, 92-5.
17. Yu, Y.; Du, H.; Liu, Q.; Pang, Z. Pressure-assisted crystallization techniques for high-performance metal halide perovskite devices. Microstructures 2025, 5, 2025046.
18. Gao, B.; Meng, J. Flexible CH3NH3PbI3 perovskite solar cells with high stability based on all inkjet printing. Solar. Energy. 2021, 230, 598-604.
19. Pendyala, N. K.; Magdassi, S.; Etgar, L. Inkjet-printed flexible semitransparent solar cells with perovskite and polymeric pillars. Solar. RRL. 2023, 7, 2200988.
20. Blackburn, D.; Hill, N. S.; Wood, C. J.; et al. Back-contact perovskite solar cell modules fabricated via roll-to-roll slot-die coating: scale-up toward manufacturing. ACS. Appl. Energy. Mater. 2025, 8, 2219-28.
21. Hu, W.; Wen, Z.; Yu, X.; et al. In situ surface fluorination of TiO2 nanocrystals reinforces interface binding of perovskite layer for highly efficient solar cells with dramatically enhanced ultraviolet-light stability. Adv. Sci. 2021, 8, 2004662.
22. Choi, Y.; Ma, H.; Jung, S.; et al. Scalable all-vacuum-processed perovskite solar cells enabled by low energy-disorder hole-transport layer. Adv. Energy. Mater. 2025, 15, 2404797.
23. Kwon, J. I.; Park, G.; Lee, G. H.; et al. Ultrahigh-resolution full-color perovskite nanocrystal patterning for ultrathin skin-attachable displays. Sci. Adv. 2022, 8, eadd0697.
24. Zhong, H.; Wang, Y.; Hou, L.; Song, X.; Zhang, F. Advancing roll-to-roll manufacturing of flexible perovskite solar cells from lab to fab. ACS. Appl. Mater. Interfaces. 2025, 17, 50168-90.
25. Heo, Y. J.; Kim, J. E.; Weerasinghe, H.; et al. Printing-friendly sequential deposition via intra-additive approach for roll-to-roll process of perovskite solar cells. Nano. Energy. 2017, 41, 443-51.
26. Ohashi, N.; Kaneko, R.; Sakai, C.; et al. Bilayer indium tin oxide electrodes for deformation-free ultrathin flexible perovskite solar cells. Solar. RRL. 2023, 7, 2300221.
27. Chueh, C. C.; Li, C. Z.; Jen, A. Y. Recent progress and perspective in solution-processed Interfacial materials for efficient and stable polymer and organometal perovskite solar cells. Energy. Environ. Sci. 2015, 8, 1160-89.
28. Li, H.; Chen, C.; Hu, H.; et al. Strategies for high-performance perovskite solar cells from materials, film engineering to carrier dynamics and photon management. InfoMat 2022, 4, e12322.
29. Wang, K.; Liu, C.; Meng, T.; Yi, C.; Gong, X. Inverted organic photovoltaic cells. Chem. Soc. Rev. 2016, 45, 2937-75.
30. Li, Z.; Jia, C.; Wan, Z.; et al. Boosting mechanical durability under high humidity by bioinspired multisite polymer for high-efficiency flexible perovskite solar cells. Nat. Commun. 2025, 16, 1771.
31. Zheng, Z.; Li, F.; Gong, J.; et al. Pre-buried additive for cross-layer modification in flexible perovskite solar cells with efficiency exceeding 22. Adv. Mater. 2022, 34, e2109879.
32. Li, H.; Zuo, C.; Angmo, D.; Weerasinghe, H.; Gao, M.; Yang, J. Fully roll-to-roll processed efficient perovskite solar cells via precise control on the morphology of PbI2:CsI layer. Nanomicro. Lett. 2022, 14, 79.
33. Hu, Q.; Zhao, L.; Wu, J.; et al. In situ dynamic observations of perovskite crystallisation and microstructure evolution intermediated from [PbI6]4- cage nanoparticles. Nat. Commun. 2017, 8, 15688.
34. Qiu, S.; Majewski, M.; Dong, L.; et al. In situ probing the crystallization kinetics in gas‐quenching‐assisted coating of perovskite films. Adv. Energy. Mater. 2024, 14, 2303210.
35. Liu, H.; Wu, H.; Zhou, Z.; et al. Simultaneous mechanical and chemical synthesis of long-range-ordered perovskites. Nat. Synth. 2024, 4, 196-208.
36. Fahim, M.; Firdous, I.; Tsang, S. W.; Daoud, W. A. Engineering intrinsic flexibility in polycrystalline perovskite film by grain boundary stitching for high mechanical endurance. Nano. Energy. 2022, 96, 107058.
37. Ramírez, E. A.; Velásquez, J. P.; Flórez, A.; Montoya, J. F.; Betancur, R.; Jaramillo, F. Blade-coated solar minimodules of homogeneous perovskite films achieved by an air knife design and a machine learning-based optimization. Adv. Eng. Mater. 2022, 25, 2200964.
38. Pei, L.; Yu, H.; Zhang, Q.; Li, J.; Wang, K.; Hu, B. Concave and convex bending influenced mechanical stability in flexible perovskite solar cells. J. Phys. Chem. C. 2020, 124, 2340-5.
39. Wang, K.; Wu, C.; Hou, Y.; et al. A nonionic and low-entropic MA(MMA)nPbI3-ink for fast crystallization of perovskite thin films. Joule 2020, 4, 615-30.
40. Noel, N. K.; Habisreutinger, S. N.; Wenger, B.; et al. A low viscosity, low boiling point, clean solvent system for the rapid crystallisation of highly specular perovskite films. Energy. Environ. Sci. 2017, 10, 145-52.
41. Zhu, W.; Wang, D.; Chen, Y.; et al. Room-temperature processed annealing-free printable carbon-based mesoscopic perovskite solar cells with 17.34% efficiency. ACS. Appl. Mater. Interfaces. 2024, 16, 7265-74.
42. Deng, Y.; Van, Brackle. C. H.; Dai, X.; Zhao, J.; Chen, B.; Huang, J. Tailoring solvent coordination for high-speed, room-temperature blading of perovskite photovoltaic films. Sci. Adv. 2019, 5, eaax7537.
43. Lemarchand, F.; Rivas, A.; Pradera-mallabiabarrena, A.; Salterain, A. An elastohydrodynamic model of the slot-die coating process. J. Comput. Des. Eng. 2024, 11, 213-31.
44. Guo, Q.; Gong, X.; Shen, Z.; Hao, X.; Zhang, J. Numerical simulation on preparing uniform and stable perovskite wet film in slot-die coating process. ACS. Omega. 2023, 8, 19547-55.
45. Hou, Y.; Wu, H.; Yoon, J.; et al. Self-assembly of 0D/3D perovskite bi‐layer from a micro-emulsion ink. Adv. Energy. Mater. 2023, 13, 2300570.
46. Cheng, Y.; Ding, L. Pushing commercialization of perovskite solar cells by improving their intrinsic stability. Energy. Environ. Sci. 2021, 14, 3233-55.
47. Hu, X.; Zhao, C.; Liu, Y.; et al. Blade-coated perovskite-organic tandem solar cells in ambient conditions. Adv. Funct. Mater. 2025, 36, e12093.
48. Hu, J.; Xu, X.; Chen, Y.; et al. Overcoming photovoltage deficit via natural amino acid passivation for efficient perovskite solar cells and modules. J. Mater. Chem. A. 2021, 9, 5857-65.
49. Xu, Z.; Zeng, L.; Hu, J.; et al. Reducing energy barrier of δ-to-α phase transition for printed formamidinium lead iodide photovoltaic devices. Nano. Energy. 2022, 91, 106658.
50. Rana, P. J. S.; Febriansyah, B.; Koh, T. M.; et al. Molecular locking with all-organic surface modifiers enables stable and efficient slot-die-coated methyl-ammonium-free perovskite solar modules. Adv. Mater. 2023, 35, e2210176.
51. Chandrasekhar, P. S.; Chapagain, S.; Blake, M.; Armstrong, P. J.; Grapperhaus, C.; Druffel, T. L. Rapid scalable fabrication of roll-to-roll slot-die coated flexible perovskite solar cells using intense pulse light annealing. Sustain. Energy. Fuels. 2022, 6, 5316-23.
52. Feng, S. P.; Cheng, Y.; Yip, H. L.; et al. Roadmap on commercialization of metal halide perovskite photovoltaics. J. Phys. Mater. 2023, 6, 032501.
53. Schackmar, F.; Laufer, F.; Singh, R.; et al. In situ process monitoring and multichannel imaging for vacuum-assisted growth control of inkjet-printed and blade-coated perovskite thin-films. Adv. Mater. Technol. 2022, 8, 2201331.
54. Laufer, F.; Götz, M.; Paetzold, U. W. Deep learning for augmented process monitoring of scalable perovskite thin-film fabrication. Energy. Environ. Sci. 2025, 18, 1767-82.
55. Abdelsamie, M.; Cruse, K.; Tamura, N.; Ceder, G.; Sutter-fella, C. M. Impact of processing conditions on the film formation of lead-free halide double perovskite Cs2AgBiBr6. J. Mater. Chem. A. 2022, 10, 19868-80.
56. Li, J.; Munir, R.; Fan, Y.; et al. Phase transition control for high-performance blade-coated perovskite solar cells. Joule 2018, 2, 1313-30.
57. Yang, T. Y.; Kim, Y. Y.; Seo, J. Roll-to-roll manufacturing toward lab-to-fab-translation of perovskite solar cells. APL. Mater. 2021, 9, 110901.
58. Ying, Z.; Su, S.; Li, X.; et al. Antisolvent seeding of self-assembled monolayers for flexible monolithic perovskite/Cu(In,Ga)Se2 tandem solar cells. Nat. Energy. 2025, 10, 737-49.
