REFERENCES

1. Armand, M.; Tarascon, J. Building better batteries. Nature 2008, 451, 652-7.

2. Ouyang, C.; Shi, S.; Lei, M. Jahn-Teller distortion and electronic structure of LiMn₂O₄. J. Alloys. Compd. 2009, 474, 370-4.

3. Zhang, Y.; Huo, Q.; Du, P.; et al. Advances in new cathode material LiFePO₄ for lithium-ion batteries. Synth. Met. 2012, 162, 1315-26.

4. Lyu, Y.; Wu, X.; Wang, K.; et al. An overview on the advances of LiCoO₂ cathodes for lithium-ion batteries. Adv. Energy. Mater. 2020, 11, 2000982.

5. Chen, S.; Ye, S.; Xu, X.; et al. Recent advances in conversion-type iron-based materials for sodium-ion batteries. Microstructures 2025, 5, 2025084.

6. Johnson, C.; Kim, J.; Lefief, C.; Li, N.; Vaughey, J.; Thackeray, M. The significance of the Li₂MnO₃ component in ‘composite’ xLi₂MnO₃·(1-x)LiMn_0.5Ni_0.5O₂ electrodes. Electrochem. Commun. 2004, 6, 1085-91.

7. Kuwahara, A.; Suzuki, S.; Miyayama, M. High-rate properties of LiFePO₄/carbon composites as cathode materials for lithium-ion batteries. Ceram. Int. 2008, 34, 863-6.

8. Guo, S.; Liu, P.; Yu, H.; et al. A layered P2‐ and O3‐type composite as a high-energy cathode for rechargeable sodium-ion batteries. Angew. Chem. Int. Ed. 2015, 54, 5894-9.

9. Kim, S. Y.; Cha, H.; Kostecki, R.; Chen, G. Composite cathode design for high-energy all-solid-state lithium batteries with long cycle life. ACS. Energy. Lett. 2022, 8, 521-8.

10. Zhang, X.; Yu, H. Crystalline domain battery materials. Acc. Chem. Res. 2019, 53, 368-79.

11. Wang, R.; Qian, G.; Liu, T.; et al. Tuning Li-enrichment in high-Ni layered oxide cathodes to optimize electrochemical performance for Li-ion battery. Nano. Energy. 2019, 62, 709-17.

12. Zhang, J.; Yang, Z.; Gao, R.; Gu, L.; Hu, Z.; Liu, X. Suppressing the structure deterioration of Ni-rich LiNi_0.8Co_0.1Mn_0.1O₂ through atom-scale interfacial integration of self-forming hierarchical spinel layer with Ni gradient concentration. ACS. Appl. Mater. Interfaces. 2017, 9, 29794-803.

13. Zhang, X.; Wang, M.; Guo, Z.; Chen, C.; Cheng, Y.; Xia, Y. In situ inducing spinel/rock salt phases to stabilize Ni-Rich cathode via sucrose heat treatment. Energy. Mater. Adv. 2023, 4, 0034.

14. Yu, L.; Cheng, Z.; Xu, K.; et al. Interlocking biphasic chemistry for high-voltage P2/O3 sodium layered oxide cathode. Energy. Storage. Mater. 2022, 50, 730-9.

15. Liu, Z.; Zhou, C.; Liu, J.; Yang, L.; Liu, J.; Zhu, M. Phase tuning of P2/O3-type layered oxide cathode for sodium ion batteries via a simple Li/F co-doping route. Chem. Eng. J. 2022, 431, 134273.

16. Wang, J.; Teng, Y.; Su, G.; Bao, S.; Lu, J. A dual-modification strategy for P2-type layered oxide via bulk Mg/Ti co-substitution and MgO surface coating for sodium ion batteries. J. Colloid. Interface. Sci. 2022, 608, 3013-21.

17. Wu, T.; Liu, X.; Zhang, X.; et al. Full concentration gradient-tailored Li-rich layered oxides for high-energy lithium-ion batteries. Adv. Mater. 2020, 33, 2001358.

18. Zhu, Z.; Yu, D.; Yang, Y.; et al. Gradient Li-rich oxide cathode particles immunized against oxygen release by a molten salt treatment. Nat. Energy. 2019, 4, 1049-58.

19. Ran, F. A.; Hsu, P. D.; Wright, J.; Agarwala, V.; Scott, D. A.; Zhang, F. Genome engineering using the CRISPR-Cas9 system. Nat. Protoc. 2013, 8, 2281-308.

20. Huang, S.; Yan, Y.; Su, F.; et al. Research progress in gene editing technology. Front. Biosci. (Landmark. Ed). 2021, 26, 916.

21. Wu, Z.; Zhang, C.; Yuan, F.; et al. Ni-rich cathode materials for stable high-energy lithium-ion batteries. Nano. Energy. 2024, 126, 109620.

22. Zhou, X.; Yang, C.; Liu, X.; et al. Inhibiting inter-layer gliding in transition metal layered oxides through interphase engineering for sodium-ion batteries. Nat. Commun. 2025, 16, 6691.

23. Zhang, Q.; Wang, J.; Chu, Y.; et al. Intralattice-bonded phase-engineered ultrahigh-Ni single-crystalline cathodes suppress strain evolution. Nat. Energy. 2025, 10, 1001-12.

24. Ding, F.; Ji, P.; Han, Z.; et al. Tailoring planar strain for robust structural stability in high-entropy layered sodium oxide cathode materials. Nat. Energy. 2024, 9, 1529-39.

25. Kong, D.; Hu, J.; Chen, Z.; et al. Ti‐gradient doping to stabilize layered surface structure for high performance high‐Ni oxide cathode of Li‐ion battery. Adv. Energy. Mater. 2019, 9, 1901756.

26. Li, X.; Qiao, Y.; Guo, S.; et al. Direct visualization of the reversible O^2-/O^- redox process in Li‐rich cathode materials. Adv. Mater. 2018, 30, 1705197.

27. Hong, J.; Gent, W. E.; Xiao, P.; et al. Metal-oxygen decoordination stabilizes anion redox in Li-rich oxides. Nat. Mater. 2019, 18, 256-65.

28. Zhang, B.; Zhang, B.; Wang, L.; et al. Li and Ti Co-doping to stabilize slabs of high-voltage P2-type Na_0.560[Li_0.041Mn_0.642Ni_0.221Ti_0.095]O₂. J. Alloys. Compd. 2020, 824, 153938.

29. Zhu, X.; Schulli, T.; Wang, L. Stabilizing high-voltage cathode materials for next-generation Li-ion batteries. Chem. Res. Chin. Univ. 2020, 36, 24-32.

30. Zhuo, Z.; Dai, K.; Qiao, R.; et al. Cycling mechanism of Li₂MnO₃: Li-CO₂ batteries and commonality on oxygen redox in cathode materials. Joule 2021, 5, 975-97.

31. Biecher, Y.; Baux, A.; Fauth, F.; Delmas, C.; Goward, G. R.; Carlier, D. Structure and electronic structure evolution of P2-Na_xCoO₂ phases from X-ray diffraction and ²³Na magic angle spinning nuclear magnetic resonance. Chem. Mater. 2022, 34, 6431-9.

32. Zhang, H.; Liu, H.; Piper, L. F. J.; Whittingham, M. S.; Zhou, G. Oxygen loss in layered oxide cathodes for Li-ion batteries: mechanisms, effects, and mitigation. Chem. Rev. 2022, 122, 5641-81.

33. He, W.; Guo, W.; Wu, H.; et al. Challenges and recent advances in high capacity Li‐rich cathode materials for high energy density lithium-ion batteries. Adv. Mater. 2021, 33, 2005937.

34. Li, L.; Lun, Z.; Chen, D.; et al. Fluorination-enhanced surface stability of cation-disordered rocksalt cathodes for Li‐ion batteries. Adv. Funct. Mater. 2021, 31, 2101888.

35. Li, X.; Wang, Q.; Guo, H.; Artrith, N.; Urban, A. Understanding the onset of surface degradation in LiNiO₂ cathodes. ACS. Appl. Energy. Mater. 2022, 5, 5730-41.

36. Wang, E.; Zhao, Y.; Xiao, D.; et al. Composite nanostructure construction on the grain surface of Li‐rich layered oxides. Adv. Mater. 2020, 32, 1906070.

37. Pan, H.; Zhang, S.; Chen, J.; et al. Li- and Mn-rich layered oxide cathode materials for lithium-ion batteries: a review from fundamentals to research progress and applications. Mol. Syst. Des. Eng. 2018, 3, 748-803.

38. Zheng, J.; Ye, Y.; Liu, T.; et al. Ni/Li disordering in layered transition metal oxide: electrochemical impact, origin, and control. Acc. Chem. Res. 2019, 52, 2201-9.

39. Zhang, K.; Li, B.; Zuo, Y.; et al. Voltage decay in layered Li-rich Mn-based cathode materials. Electrochem. Energ. Rev. 2019, 2, 606-23.

40. Zuo, Y.; Li, B.; Jiang, N.; et al. A high‐capacity O2‐type Li‐rich cathode material with a single-layer Li₂MnO₃ superstructure. Adv. Mater. 2018, 30, 1707255.

41. Li, L.; Ouyang, B.; Lun, Z.; et al. Atomic-scale probing of short-range order and its impact on electrochemical properties in cation-disordered oxide cathodes. Nat. Commun. 2023, 14, 7448.

42. Zou, Z.; Mu, Y.; Han, M.; et al. Integrated polyanion-layered oxide cathodes enabling 100 000 cycle life for sodium-ion batteries. Energy. Environ. Sci. 2025, 18, 2216-30.

43. Liu, X.; Zhong, G.; Xiao, Z.; et al. Al and Fe-containing Mn-based layered cathode with controlled vacancies for high-rate sodium ion batteries. Nano. Energy. 2020, 76, 104997.

44. Darbar, D.; Muralidharan, N.; Hermann, R. P.; Nanda, J.; Bhattacharya, I. Evaluation of electrochemical performance and redox activity of Fe in Ti doped layered P2-Na_0.67Mn_0.5Fe_0.5O₂ cathode for sodium ion batteries. Electrochim. Acta. 2021, 380, 138156.

45. Wang, R.; Chen, X.; Huang, Z.; et al. Twin boundary defect engineering improves lithium-ion diffusion for fast-charging spinel cathode materials. Nat. Commun. 2021, 12, 3085.

46. Meng, F.; Li, Y.; Wang, S.; et al. Grain-boundary-rich cathode enabling fast ion diffusion kinetics for low-temperature and high-rate lithium-ion batteries. Energy. Environ. Sci. 2025, 18, 4775-86.

47. Zhang, J.; Yu, Z.; Zhu, Y.; et al. Configuration design and interface reconstruction to realize the superior high-rate performance for sodium layered oxide cathodes. Adv. Energy. Mater. 2025, 15, 2405951.

48. Yang, C.; Rousse, G.; Louise Svane, K.; et al. Cation insertion to break the activity/stability relationship for highly active oxygen evolution reaction catalyst. Nat. Commun. 2020, 11, 1378.

49. Wu, F.; Zhang, X.; Zhao, T.; Li, L.; Xie, M.; Chen, R. Multifunctional AlPO₄ coating for improving electrochemical properties of low-cost Li[Li_0.2Fe_0.1Ni_0.15Mn_0.55]O₂ cathode materials for lithium-ion batteries. ACS. Appl. Mater. Interfaces. 2015, 7, 3773-81.

50. Zhang, X. D.; Shi, J. L.; Liang, J. Y.; et al. Suppressing surface lattice oxygen release of Li‐rich cathode materials via heterostructured spinel Li₄Mn₅O₁₂ coating. Adv. Mater. 2018, 30, 1801751.

51. Zheng, J.; Gu, M.; Xiao, J.; et al. Functioning mechanism of AlF₃ coating on the Li- and Mn-rich cathode materials. Chem. Mater. 2014, 26, 6320-7.

52. Wang, B.; Wang, K.; Ren, H.; et al. Spinel nanodomains relieve strain and stabilize lattice oxygen in ultrahigh-nickel zero-cobalt cathodes. eScience 2026, 6, 100509.

53. Chung, H.; Li, Y.; Zhang, M.; et al. Mitigating anisotropic changes in classical layered oxide materials by controlled twin boundary defects for long cycle life Li-ion batteries. Chem. Mater. 2022, 34, 7302-12.

54. Zuo, P.; Abraham, D. P.; Wang, C. Origin of electrochemical activation leading to enhanced cycling stability of Li‐ and Mn‐rich cathodes. Angew. Chem. Int. Ed. 2026, 65, e8818196.

55. Han, S.; Park, G.; Kim, D.; Seo, M.; Park, N.; Sun, Y. Introducing Co nanoshells onto Ni-rich cathode materials for high-rate long-life Li-ion batteries. ACS. Energy. Lett. 2024, 9, 5859-68.

56. Xu, G.; Liu, X.; Zhou, X.; et al. Native lattice strain induced structural earthquake in sodium layered oxide cathodes. Nat. Commun. 2022, 13, 436.

57. Zhou, Y.; Zhang, Y.; Huang, J.; et al. Impact of grain boundary segregation on piezoelectric performance of CaBi₂Nb₂O₉ high-temperature piezoceramics. Microstructures 2026, 6, 2026029.

58. Sun, H. H.; Ryu, H.; Kim, U.; et al. Beyond doping and coating: prospective strategies for stable high-capacity layered Ni-rich cathodes. ACS. Energy. Lett. 2020, 5, 1136-46.

59. Zubair, M.; Wang, L.; Wang, Y.; et al. High-temperature electrochemical performance enhancement of lithium-rich layered oxides by surface modification. ACS. Appl. Energy. Mater. 2020, 3, 4888-95.

60. Yang, W.; Zuo, Y.; Chen, Q.; Zhang, Y. Synthesis of high-performance LiNi_0.6Co_0.2Mn_0.2O₂ cathode material for lithium-ion batteries by using a four times liquid nitrogen quenching method and an Al₂O₃ coating method. Materials 2019, 12, 3666.

61. Yu, W.; Deng, N.; Feng, Y.; et al. Understanding multi-scale ion-transport in solid-state lithium batteries. eScience 2025, 5, 100278.

62. Madika, B.; Saha, A.; Kang, C.; et al. Artificial intelligence for materials discovery, development, and optimization. ACS. Nano. 2025, 19, 27116-58.

63. Cheng, M.; Fu, C.; Okabe, R.; et al. Artificial intelligence-driven approaches for materials design and discovery. Nat. Mater. 2026, 25, 174-90.

64. Lu, X.; Owen, R. E.; Du, W.; et al. Unravelling electro-chemo-mechanical processes in graphite/silicon composites for designing nanoporous and microstructured battery electrodes. Nat. Nanotechnol. 2025, 20, 1656-66.