REFERENCES

1. Jin, M.; Yao, Y.; Yang, Y.; Liao, T.; Pan, F.; Deng, Y. A comprehensive review of Bi₂Te₃-based thermoelectric generators for self-powered IoT sensors and wearable electronics. Sci. China. Technol. Sci. 2026, 69, 1700201.

2. Yuan, X.; Qiu, P.; Sun, C.; et al. Screening thermoelectric materials for high-output performance in wearable electronics. Energy. Environ. Sci. 2025, 18, 5416-23.

3. Tang, X.; Li, Z.; Liu, W.; Zhang, Q.; Uher, C. A comprehensive review on Bi₂Te₃‐based thin films: thermoelectrics and beyond. Interdiscip. Mater. 2022, 1, 88-115.

4. Li, Z.; Deng, T.; Qiu, P.; et al. Plasticity of Bi₂Te₃-family thermoelectric crystals. Nat. Commun. 2025, 16, 5190.

5. Hu, B.; Shi, X. L.; Cao, T.; et al. Advances in flexible thermoelectric materials and devices fabricated by magnetron sputtering. Small. Sci. 2023, 5, 2300061.

6. Brzozowski, D.; Liu, Y.; Neeleman, K.; Nord, M.; Hallsteinsen, I. G. Growth control of highly textured Bi₂Te₃ thin films by pulsed laser deposition. Cryst. Growth. Des. 2026, 26, 120-30.

7. Mao, D.; Yang, J.; Han, M.; et al. Homo-layer flexible Bi₂Te₃-based films with high thermoelectric performance. Sci. Adv. 2025, 11, eadz1019.

8. Zheng, Z. H.; Shi, X. L.; Ao, D. W.; et al. Harvesting waste heat with flexible Bi₂Te₃ thermoelectric thin film. Nat. Sustain. 2023, 6, 180-91.

9. Künzel, C.; Dammler, K.; Betke, U.; Urbaschok, J.; Scheffler, F. High-perfomance doctor bladed thermoelectric microlayers. Mater. Des. 2020, 196, 109087.

10. Chen, Z.; Li, B.; Li, H.; et al. Slurry-processed bismuth telluride-based thermoelectric films: advances in tape casting, screen printing, and device applications. Mater. Sci. Eng. B. 2026, 325, 119078.

11. Zhang, C.; Zhou, Y.; Xing, F.; et al. PEDOT:PSS‐enabled CNT and Bi_0.5Sb_1.5Te₃ interface microengineering for integrated thermoelectric energy harvesting and corrosion protection in cementitious composite. Adv. Sci. 2025, 12, e08424.

12. Ahmad, K.; Almutairi, Z. Enhanced thermoelectric properties of bismuth telluride (Bi₂Te₃) and multiwall carbon nanotube (MWCNT) composites. Mater. Today. Commun. 2023, 35, 106228.

13. Kim, M. Y.; Choi, S. W.; Boo, S. J.; Lee, J. H.; Noh, H. S.; Kim, H. S. Fabrication and electrical characteristics of graphite/carbon nanotube/polyvinyl butyral composite film via tape-casting and heat-treatment. J. Nanosci. Nanotechnol. 2015, 15, 8055-61.

14. Khazaka, R.; Locatelli, M.; Diaham, S.; Bidan, P. Effects of mechanical stresses, thickness and atmosphere on aging of polyimide thin films at high temperature. Polym. Degrad. Stab. 2013, 98, 361-7.

15. Jin, J.; Fabiani, D.; Suraci, S. V. High temperature performance of polyimide under accelerated thermal aging: linking chemical modifications to electrical properties. Polym. Degrad. Stab. 2026, 246, 111939.

16. Kim, H. S.; Dhage, S. R.; Shim, D. E.; Hahn, H. T. Intense pulsed light sintering of copper nanoink for printed electronics. Appl. Phys. A. 2009, 97, 791-8.

17. Hu, Z.; Li, A.; Sato, N.; et al. Phase-controlled molecular beam deposition unlocks flexible MgAgSb thermoelectrics with exceptional performance. Nat. Commun. 2026, 17, 2674.

18. Liu, L.; Cao, Z.; Chen, M.; Jiang, J. Microstructure and thermoelectric properties of (Bi_0.48Sb_1.52)Te₃ thick films prepared with tape casting method. Electronics 2021, 10, 140.

19. Luong, D. X.; Bets, K. V.; Algozeeb, W. A.; et al. Gram-scale bottom-up flash graphene synthesis. Nature 2020, 577, 647-51.

20. Deng, B.; Eddy, L.; Wyss, K. M.; Tiwary, C. S.; Tour, J. M. Flash Joule heating for synthesis, upcycling and remediation. Nat. Rev. Clean. Technol. 2025, 1, 32-54.

21. Zheng, P.; Zhao, H.; Li, J.; Wu, F.; Liu, Q. Flame retardant based on metal catalyzed instantaneous crosslinking to form carbon for improving the safety performance of aircraft epoxy resin. Saf. Sci. 2024, 178, 106627.

22. Avery, A. D.; Zhou, B. H.; Lee, J.; et al. Tailored semiconducting carbon nanotube networks with enhanced thermoelectric properties. Nat. Energy. 2016, 1, 16033.

23. Mytafides, C. K.; Wright, W. J.; Gustinvil, R.; et al. Additive manufacturing of highly conductive carbon nanotube architectures towards carbon-based flexible thermoelectric generators. Energy. Adv. 2024, 3, 1642-52.

24. Dresselhaus, M. S.; Dresselhaus, G.; Saito, R.; Jorio, A. Raman spectroscopy of carbon nanotubes. Phys. Rep. 2005, 409, 47-99.

25. Ferrari, A. C.; Meyer, J. C.; Scardaci, V.; et al. Raman spectrum of graphene and graphene layers. Phys. Rev. Lett. 2006, 97, 187401.

26. Bhandari, S.; Mishra, T. P.; Guillon, O.; Yadav, D.; Bram, M. Accessing the role of Joule heating on densification during flash sintering of YSZ. Scr. Mater. 2022, 211, 114508.

27. Chen, J.; Xiong, X.; Xiao, P. The effect of MWNTs on the microstructure of resin carbon and thermal conductivity of C/C composites. Solid. State. Sci. 2009, 11, 1890-3.

28. Zhang, Z.; Sun, M.; Liu, J.; et al. Ultra-fast fabrication of Bi₂Te₃ based thermoelectric materials by flash-sintering at room temperature combining with spark plasma sintering. Sci. Rep. 2022, 12, 10045.

29. Cheng, L.; Yeung, C. S.; Huang, L.; et al. Flash healing of laser-induced graphene. Nat. Commun. 2024, 15, 2925.

30. Yao, Q.; Chen, L.; Zhang, W.; Liufu, S.; Chen, X. Enhanced thermoelectric performance of single-walled carbon nanotubes/polyaniline hybrid nanocomposites. ACS. Nano. 2010, 4, 2445-51.

31. Heremans, J. P.; Jovovic, V.; Toberer, E. S.; et al. Enhancement of thermoelectric efficiency in PbTe by distortion of the electronic density of states. Science 2008, 321, 554-7.

32. Wu, H.; Liu, X.; Wei, P.; et al. Fabrication and characterization of brush-printed p-type Bi0.5Sb1.5Te3 thick films for thermoelectric cooling devices. J. Electron. Mater. 2017, 46, 2950-7.

33. Madan, D.; Chen, A.; Wright, P. K.; Evans, J. W. Dispenser printed composite thermoelectric thick films for thermoelectric generator applications. J. Appl. Phys. 2011, 109, 034904.

34. Jiang, Q.; Pan, D.; Wang, Y.; et al. High thermoelectric performance related to PVDF ferroelectric domains in p‐type flexible PVDF‐Bi_0.5Sb_1.5Te₃ composite film. Small 2024, 20, e2306786.

35. Blackburn, J. L.; Ferguson, A. J.; Cho, C.; Grunlan, J. C. Carbon‐nanotube‐based thermoelectric materials and devices. Adv. Mater. 2018, 30, 1704386.

36. Cho, C.; Wallace, K. L.; Tzeng, P.; Hsu, J. H.; Yu, C.; Grunlan, J. C. Outstanding low temperature thermoelectric power factor from completely organic thin films enabled by multidimensional conjugated nanomaterials. Adv. Energy. Mater. 2016, 6, 1502168.

37. Shakouri, A. Recent developments in semiconductor thermoelectric physics and materials. Annu. Rev. Mater. Res. 2011, 41, 399-431.

38. Snyder, G. J.; Toberer, E. S. Complex thermoelectric materials. Nat. Mater. 2008, 7, 105-14.

39. Hossain, M. S.; Li, T.; Yu, Y.; Yong, J.; Bahk, J. H.; Skafidas, E. Recent advances in printable thermoelectric devices: materials, printing techniques, and applications. RSC. Adv. 2020, 10, 8421-34.

40. Bharti, M.; Singh, A.; Saini, G.; et al. Boosting thermoelectric power factor of free-standing Poly(3,4ethylenedioxythiophene):polystyrenesulphonate films by incorporation of bismuth antimony telluride nanostructures. J. Power. Sources. 2019, 435, 226758.

41. Zhang, T.; Li, K.; Li, C.; Ma, S.; Hng, H. H.; Wei, L. Mechanically durable and flexible thermoelectric films from PEDOT:PSS/PVA/Bi_0.5Sb_1.5Te₃ nanocomposites. Adv. Elect. Materials. 2017, 3, 1600554.

42. Jin, Q.; Zhao, Y.; Long, X.; et al. Flexible carbon nanotube‐epitaxially grown nanocrystals for micro‐thermoelectric modules. Adv. Mater. 2023, 35, e2304751.

43. Varghese, T.; Dun, C.; Kempf, N.; et al. Flexible thermoelectric devices of ultrahigh power factor by scalable printing and interface engineering. Adv. Funct. Mater. 2020, 30, 1905796.

44. Saeidi‐Javash, M.; Kuang, W.; Dun, C.; Zhang, Y. 3D conformal printing and photonic sintering of high‐performance flexible thermoelectric films using 2D nanoplates. Adv. Funct. Mater. 2019, 29, 1901930.

45. Xu, S.; Hong, M.; Shi, X. L.; et al. High-performance PEDOT:PSS flexible thermoelectric materials and their devices by triple post-treatments. Chem. Mater. 2019, 31, 5238-44.

46. Ding, Y.; Qiu, Y.; Cai, K.; et al. High performance n-type Ag₂Se film on nylon membrane for flexible thermoelectric power generator. Nat. Commun. 2019, 10, 841.

47. Venkatasubramanian, R.; Siivola, E.; Colpitts, T.; O’Quinn, B. Thin-film thermoelectric devices with high room-temperature figures of merit. Nature 2001, 413, 597-602.

48. Ahmad Musri, N.; Putthisigamany, Y.; Chelvanathan, P.; Ahmad Ludin, N.; Md Yatim, N.; Syafiq, U. Fabrication and performance analysis of Bi₂Te₃ and Sb₂Te₃ thin film thermoelectric generator for waste heat recovery. J. Climate. Change. 2025, 11, 13.

49. Choudhary, J. S.; Tomar, M.; Jha, R.; Sharma, A. Optimizing Bi₂Te₃ thin film thickness for enhanced thermal conductivity and thermoelectric performance of a Bi₂Te₃ thermoelectric generator. J. Electron. Mater. 2025, 54, 8385-96.

50. Qu, M.; Zhao, W.; Wu, D.; et al. Dry‐wet hybrid direct printing of laser‐induced graphene and zinc oxide nanoribbons for continuous‐flow manufacturing of flexible wearable photodetectors. Adv. Mater. Technol. 2024, 9, 2302056.