fig8

Multifunctional MXene inks for printed electrochemical energy storage devices

Figure 8. Coating methods. (A) SEM image of interdigital gap for on-chip MSCs manufactured by cutting-spraying method and digital photograph of integrating MXene-based on-chip MSCs. Reproduced with permission[139]. Copyright 2020, Elsevier. (B) By blade coating with large flake of MXene aqueous ink, a high conductivity film can be produced. Reproduced with permission[141]. Copyright 2023, American Chemical Society. (C)Slot die coating of transparent and non-transparent films on different substrates. Reproduced with permission[142]. Copyright 2023, John Wiley and Sons. (D) The preparation of the delaminated-Ti3C2 via the freeze-and-thaw (FAT) method and SEM images of delaminated-Ti3C2 with obvious wrinkles on the surface. Reproduced with permission[143]. Copyright 2020, Wiley-VCH.

Energy Materials
ISSN 2770-5900 (Online)
Follow Us

Portico

All published articles are preserved here permanently:

https://www.portico.org/publishers/oae/

Portico

All published articles are preserved here permanently:

https://www.portico.org/publishers/oae/